Scout V2

new_sct422 new_sct422_2 Click to enlarge

The “Scout V2” is a highly accurate 24bit resolution USB data acquisition. It is developed for noise and vibration measurements with Microflown sensor based solutions. The “Scout V2” has four inputs, one analog output, one amplified output, tacho input and a external trigger channel. It also supports other type of sensors like microphones, accelerometers, IEPE sensors and tachometers.To enable some features of our solutions it could be required to add one of these types of sensors.

In most common measurement applications the “Scout V2” makes use of the USB powering so no additional power cables are required. Only when the amplified output, which uses an internal integrated amplifier, is used the external powering is required. The amplified output can be used to excite a sound source or small shaker.


  • All Microflown sensors can be directly connected, from 1 to 4 channels, AC coupling.
  • Microflown technologies software application packages such as: Sound Intensity, In-situ absorpiton, Scan & Paint and Scan & Paint for airborne Transfer Path Analysis (TPA)
  • Calibration setup
  • Sound source mapping with phase/angle reference (f.e. Rotating machinery testing)
  • External / remote triggered control



126 x 49 x 180

Height: 126 mm
Width: 49 mm
Depth: 180 mm
Weight: 900 g


USB 2.0

Analog input channels

Number of inputs: 4 Analog inputs
Connector: BNC
Resolution: 24bit
Sample rate: up to 52kHZ

Tacho input channels

Number of inputs: 1
Connector: BNC
Input range: +/- 30V
Max. input frequency: 1 MHz
Minimum pulse width: 1.3 micsec
Counters: 83 nanosec resolution
21 nanosec resolution

Analog output channels

Number of inputs: 1
Connector: BNC
Resolution: 24 bit
Sample rate: up to 52 KHz
Input range: 10V peak

Amplified output channels

Number of inputs: 1
Connector: BNC
Output range: 5 to 27 watt
Gain control
Fixed gain switch

Eternal trigger

Connector: BNC
TTL rising